I am curious to hear opinions, both pro and con, on this type of lift. Some folks use them as an alternative to a 2 or 4 post lift, especially in a garage with limited space or height. Do you own one of these? Like it? Hate it? Please feel free to comment.
Please see also previous posts on "jack stand safety" from March-April 2011;
http://baurspotting.blogspot.com/2011/03/jackstand-safety.html
http://baurspotting.blogspot.com/2011/03/jackstand-safety-ii.html
http://baurspotting.blogspot.com/2011/04/video-falling-jack-stands.html
http://baurspotting.blogspot.com/2011/04/surprise-are-ratchetting-jack-stands.html
and more....
http://baurspotting.blogspot.com/2011/03/time-out-public-service-safety-message_23.html
Please see also previous posts on "jack stand safety" from March-April 2011;
http://baurspotting.blogspot.com/2011/03/jackstand-safety.html
http://baurspotting.blogspot.com/2011/03/jackstand-safety-ii.html
http://baurspotting.blogspot.com/2011/04/video-falling-jack-stands.html
http://baurspotting.blogspot.com/2011/04/surprise-are-ratchetting-jack-stands.html
and more....
http://baurspotting.blogspot.com/2011/03/time-out-public-service-safety-message_23.html
Here is a pic of how the rear of the Kwick-lift is raised.
Corvette on Kwick-Lift and 4 jack stands.... and casters!
The owner of the Corvette above commented:
"One bridge (that's the part that is attached between the two ramps) is standard
with the Kwik Lift, a second bridge is optional. I also opted for a second
bridge. The bridge permits the use of a bottle jack to do exactly as I have done
to lift the car and install jack stands. The bridge(s) slides back and forth and
has a hole on each end to permit bolting it in place on the ramps. Thus the
bridge can be positioned anywhere along the ramps as desired. Also, the ramps
are telescopic and have 3 sets of bolt holes to secure the sections together
once they are extended to the desired length. I have mine set at the shortest
length".
Removing a Honda engine from below.